ALLOYS

316/316L Stainless Steel

Type 316 is a molybdenum steel possessing improved resistance to pitting by solutions containing chlorides and other halides.  In addition, it provides excellent elevated temperature tensile, creep and stress-rupture strengths.

Availability – Stainless Steel 316/316L

Seamless Pipe 1/4″ – 20″

Weld Pipe 1/2″ – 24″

Butt-Weld Fittings 1/2″ – 24″

Butt-Weld Fittings Seamless 1/2″ – 12″

Pressure Fittings 1/4″ – 2″

150# Fittings 1/4″ – 4″

150# Pipe Nipples 1/4″ – 4″

Valves 1/2″ – 24″

Tubing 1/4″, 3/8″, 1/2″

Flanges 1/2″ – 24″

ASTM A312, A376, A358, A269,A249, A403, A182, A351
ASME SA312, SA376, SA358, SA269,SA249,SA403, SA182, SA351

Chemical Composition – Stainless Steel 316/316L

C CR MN MO NI P S SI
Max Max Max Max Max
0.035% 16% – 20% 2.0% 2% – 3% 10% – 15% 0.040% 0.030% 0.75%

Design Features – Stainless Steel 316/316L

  • Type 316 is more resistant to atmospheric and other mild environments than Type 304. it is resistant to dilute solutions (i.e. 1-5%) of sulfuric acid up to 120°F. However, in certain oxidizing acids, Type 316 is less resistant than Type 304.
  • 316 is susceptible to carbide precipitation when exposed in the temperature range of 800° – 1500°F and therefore is susceptible to intergranular corrosion in the as-welded condition. Annealing after welding will restore corrosion resistance.
  • Type316L has the same composition as Type 316 except the carbon content is held below 0.03%. Not unexpectedly, its general corrosion resistance and other properties closely correspond to those of Type 316. However, it does provide immunity to intergranular attack in the as-welded condition or with short periods of exposure in the temperature range of 800° – 1500°F. The use of 316L is recommended when exposure in the carbide precipitation range is unavoidable and where annealing after welding is not practical. However, prolonged exposure in this range may embrittle the material and make it susceptible to intergranular attack.
  • The maximum temperature for scaling resistance in contnuous services is about 1650°F, and 1500°F for intermittent service.
  • May be susceptible to chloride stress corrosion cracking.
  • Non-hardenable; non-magnetic in the annealed condition, and slightly magnetic when cold worked.
  • Non-hardenable; non-magnetic in the annealed condition, and slightly magnetic when cold worked.

Typical Applications – Stainless Steel 316/316L

  • Nuclear
  • Chemical Processing
  • Rubber
  • Plastics
  • Pulp & Paper
  • Pharmaceutical
  • Textile
  • Heat exchangers, condensers & evaporators

Tensile Requirements – Stainless Steel 316/316L

Tensile Strength (KSI): 70
Yield Strength (KSI): 25

KSI can be converted to MPA (Megapascals) by multiplying by 6.895.





    Which of the following are you interested in?

    Check All That Apply

    Pipe & TubingValvesFittingsFlangesSanitary Products


    Upload Files